Fingerprint Supplies , Hydrology and Fluid Mechanics , Thermodynamics , Enviromental Engineering and General Sciences , Civil Engineering and Material Sciences , Architecture , Industrial Machinery , Mechanical Engineering ...
HOME ABOUT US ORDER CONTACT LOGIN E-MAIL
CATALOGUE LIST
Fingerprint Supplies
Hydrology and Fluid Mechanics
Thermodynamics
Environmental Engineering and General Sciences
Civil Engineering and Material Sciences
Architecture
Industrial Machinery, etc.
Mechanical Engineering


HYDROLOGY AND FLUID MECHANICS
4.27 Multi Pump Test Rig

Note : All machine configuration and specification are subjected to change without advance notice for better quality of product.

General Description :

The multi pump test rig is designed to run item by item of the following pumps on the same supporting base and accessories. The stainless steel supporting frame with 4 breakable wheels, water storage tank, flow meter, manometers or pressure gauges are provided.

Installation and disassembling of installation for each pump has to be done by students using quick water connectors/plastic hoses. Hence, more easily to arrange and setting up the pumps manually.

The experiment purpose is to determine pump performance curves.

Specifications :
  1. Frame: Stainless steel frame and plastwood sheet with 4 breakable wheels
  2. MWater storage tank: Plastic tank ,>= 60 litres capacity.
  3. Flow measuring device: Volumetric tank with stop watch.
  4. Piping system: PVC pipes, fitting and plastic quick connectors and plastic hoses.
  5. Pressure gauges: Oil type,-1 to 3 barg.
  6. Manometer: +/- 480mm WG only available for axail pump.
  7. Torque measurement/dynamometer: Watt meter by direct measurement and calculation.
  8. Water temperature measuring device: Thermocouple with digital temperature indicator.
Dimensions and Weight (approx.) :
  1. W x L X H = 0.5m 1.2m 1.6m
  2. Shipping volume: 80Kgs GROSS 1.50 m3
Standard Accessories :
  1. Gear Pump Unit


    Bronz gear pump located at the middle of photo
    Note : all machine configuration and specification are subjected to change without advance notice for better quality of product.

    Performance Specification :
    Max flow rate: 2.5L/min typical
    Max head: 20m TDH
    Max pump speed: >= 300rpm
    Motor power rating: >= 150 W 230 VAC 50 Hz.
    ** Offers a laboratory instruction.

  2. Reciprocating Pump


    Reciprocating pump is located at right hand side of the photo
    Note : All machine configuration and specification are subjected to change without advance notice for better quality of product.

    Performance Specification :
    Max flow rate: >= 6 L/min typical
    Max head: 20m TDH
    Max pump speed: >= 350rpm
    Motor power rating: >= 150 W

    Ordering Specification :
    A small-scale commercial grade reciprocating
    Compact 230Vac 50Hz pump.
    ** Offers a laboratory instruction.

  3. Axial Pump

    Note : All machine configuration and specification are subjected to change without advance notice for better quality of product.

    Performance Specification :
    Max flow rate: >= 4 L/min typical
    Max head: 0.5m TDH
    Max pump speed: >= 400rpm
    Motor power rating: >= 25 W

    Ordering Specification :
    A small-scale made to order axial pump.
    Compact 12/24 VDC pump.
    ** Offers a laboratory instruction.

  4. Centrifugal Pump


    Bronz gear pump located at the middle of photo
    Note : All machine configuration and specification are subjected to change without advance notice for better quality of product.

    Performance Specification :
    Max. flow rate 40 lpm @ 5 Mtdh 220 VAC 50 Hz.

  5. Multistage Turbine Pump

    Performance Specification :
    2 Stage turbine pump.
    Max. flow rate ≥10 lpm @ 20 Mtdh
    >= 150 Watts , 230 VAC 50Hz.

PREVIOUS | BACK TO MENU | NEXT